Irrespective of the performance of the Canon Printer, the error support code 5200 leads to the stoppage of printing and annoys you a lot. And such issues happen because of many reasons. This error occurs in many printers and is something that you cannot predict. But you can solve canon g6020 error 5200 easily by following some steps. To resolve this issue, clean the Print Head. For that, turn off the printer and remove the ink cartridges. Then clear any debris on the print head and replace it with the original position. Lastly, turn your printer on and check if the issue has been solved or not.
top of page
To see this working, head to your live site.
1 Comment
bottom of page
Solution 1: Refill all your cartridges / Ink Tank
1. Check the ink levels in your black and colored ink cartridges and get them filled if they are running low on ink.
2. After refilling the Black cartridge, make sure that the color ink cartridge is also filled. Otherwise, you will encounter this error.
Solution 2: Clean Cartridge / Print Head Manually
Unplug the power cable of your printer and leave your printer like that for 1 hour.
2. Then, take out the ink cartridges from your printer and clean their head properly.
3. Re-insert the cartridges, re-plug the power cable and turn on your printer to check whether the error has been resolved or not.
Solution 3: Reset your Canon Printer to factory (default) settings
With these steps, we are going to reset printer settings to default settings.
Press ‘ON’ button to switch-off your printer.
2. Wait for the printer to turn-off.
3. Now, press and hold the ‘Stop’ button from your right-hand and simultaneously press and hold the ‘ON’ button from your left hand. Then, release the ‘Stop’ button after 2-3 seconds and keep holding the ‘ON’ button using your left-hand.
Regards, Jwick